|
Item No.:CH1214354
Wheel Hub Holding Tool
Description:
* Used to hold the wheel hub in
place while the axle nut is removed / installed or wheel bearing
service.
* 1/2” square drive for breaker /
extension bar.
* Works on vehicles with wheel stud
bolt patterns ranging from 4 x 100mm (3.937”) to 8 x 170.3mm
(6.704”).
* Can also be used to hold rear
differential yoke on solid axle vehicles during pinion seal or
bearing service, as well as many other types of machines with
driver shafts, yokes and universal joints.
| 
